On Wed, Mar 29, 2017 at 9:44 PM, Tom Van Dreser <benchmarkh...@gmail.com>
wrote:
> Hi
> I am a newbie to fwknop so bear with me
> I have fwknop installed on a raspberry pi and lastest version of pi.
> /usr/sbin/fwknopd -V
> fwknopd server 2.6.0
> I have installed fwkop. Configured it and it runs well with basic
> configuration to open to ANY source IP and allow SSH.
> I am now expanding a bit and experimenting with the CMD_CYCLE options
> (OPEN|CLOSE|TIMEOUT) and having no luck.
> Basically when starting /usr/sbin/fwknopd -f -vvv I see the following as
> the server starts up.
>
> /usr/sbin/fwknopd -f -vvv
> [*] Ignoring unknown access parameter: 'CMD_CYCLE_OPEN' in
> /etc/fwknop/access.conf
> [*] Ignoring unknown access parameter: 'CMD_CYCLE_CLOSE' in
> /etc/fwknop/access.conf
> [*] Ignoring unknown access parameter: 'CMD_CYCLE_TIMER' in
> /etc/fwknop/access.conf
>
> My access.conf file snippet looks like this:
> CMD_CYCLE_OPEN ping $IP
> CMD_CYCLE_CLOSE NONE
> CMD_CYCLE_TIMER 10
>
Hello Tom,
The CMD_CYCLE feature was not added until fwknop-2.6.8, so you will need to
upgrade in order for that to work. I would recommend running the latest
release (2.6.9).
Thanks,
--Mike
>
>
> ------------------------
> Tom
> benchmarkh...@gmail.com
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Fwknop-discuss mailing list
Fwknop-discuss@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/fwknop-discuss
