On Jun 26, 2010, at 4:03 PM, Bruce Johnson wrote: > To fix the magnet issue on my AlBook, I need to remove the back of the > display, which requires removing the two screws in the lower corners of the > front of the display, they're quite hard to get to, and I'm going to have to > modify an allen wrench to fit, I think. I've not been able to find out what > size they are. Anyone know offhand?
Use a 1.5 mm hex key, or a Torx T6. All you have to do is angle the key or the T6 a little bit. It doesn't have to fit perfectly, and the screws aren't torqued that much. So they should come out easily. -- Jim Scott -- You received this message because you are a member of G-Books, a group for those using G3 iBooks and PowerBooks (we run a separate list for G4 'Books). The list FAQ is at http://lowendmac.com/lists/g-books.html and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g-books Support for older Macs: http://lowendmac.com/services/
