Is the only difference between the Pismo 400 and 500 in the processor card?
I'm asking because I recently took my Pismo 400 in to Powerlogix for the G4/500 upgrade. They ran late on the install, because some of the RAM pins were not functioning properly, so they eventually gave up on it and installed the upgrade on a 500 MHz processor card, at no additional cost to me. This lets me run the cache speed at 200 MHz as opposed to 166 recommended for the 400. Is there any other architecture difference between the 400 and 500 that anyone is aware of? Thanks. Stephen -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
