On Friday, January 17, 2003, at 06:25AM, Todd Campbell <[EMAIL PROTECTED]> wrote:
>Hi List: >I am trying to configure a computer to computer network using software >base station (iMac 600 to Lombard 333) and am having no luck getting >the PB to see and join the network. Any advice would be appreciated. >Here are the specifics: >iMac 600 - airport card installed, OS X.2 >Lombard PB - Linksys Wireless PC Card WPC 11 v. 3, OS X.2.2 >Thanks, Todd computer-to-computer and software base station are two entirely different monsters. in OS X 10.2 on the iMac, go into sharing and go to the internet tab. turn on 'share ethernet connection with wireless computers' (or similar). The Lombard should then see the Airport network like any other Airport/WiFi network. -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
