Dave Bonhoff <[EMAIL PROTECTED]> wrote: I can feed an audio signal into my Lombard (running X.2.8), but I haven't figured out how to play it. OS9 can do this. I don't want to record it, just send to speakers.
Reply from Tom: Make sure System Preferences: Input and Output, settings are what you want, then make sure the application you are using is set to play sound through (your desired output) or to ~ Monitor (output) while playing, working or whatever. Outpit vollume is adjustable there, too. Of course your Line (level) Out cable must feed an amp, either one powering passive speakers or feeding a set of powered speakers directly. It's pretty similar 9, minus a few options that disn't make the transition. Good luck - sound can be soothing . . -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
