> Message-Id: <[EMAIL PROTECTED]> > From: Gavin Tiplady <[EMAIL PROTECTED]> > Subject: Trying to boot Wallstreet from external SCSI disk > Date: Tue, 3 Feb 2004 19:47:25 +1100 > > Wallstreet 292Mhz - 256Mb - Mac OS X 10.2.6. > > As recommended by people on this list in relation to an earlier query > (thank you!) I have acquired a second hand external SCSI drive (68 pin > enclosure containing HP 18.2Gb SCSI 3 LVD/SE drive) in order to perform > backups - and restores - using the beloved Carbon Copy Cloner. > > The disk was recognized after a reboot (quite hard to get used to > having to reboot all the time after years of Firewire!) and formatted, > and CCC used to clone my Mac OS X image into a partition slightly less > than 8Gb at the 'start' of the 18Gb drive. > > However when I try and boot from the newly copied image (i.e. set it > using StartUp Disk and reboot), the Mac simply goes into target disk > mode, displaying the floating SCSI symbol instead of booting. > > What am I doing wrong?
In OS 9.1 I can boot from a bootable Jaz disk connected to my Wall Street via the HDI-30 SCSI adapter by holding down the Option+Cmd+Delete+Shift keys. Maybe it still works under OS X? -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
