Hi folks,

I sent this question in a couple of weeks ago and got no replies, so I'm
checking again: anyone care to venture an opinion on this?

Our story so far: My partner's trusty Pismo 400 malfunctioned. When it gave
the 3 beeps on startup and nothing else, I looked that up and read that it
meant no RAM that was recognized was present.

This Pismo has 2 256 Mb RAM chips, that have been working in it without
any problem for about 2 years until this happened. After a whole lot of
disassembly and reassembly I have established that:

either RAM chip works in the top slot;

both RAM chips have passed the test on the Apple hardware test CD when
installed in the top slot;

either RAM chip in the bottom slot causes the Pismo not to boot (even to the
test CD), whether or not there is a chip in the top slot.

So: what would cause this, and what is the best thing to do about it? Does
this mean the logic board is going? Does this problem presage other problems
to come?

There also seems to be new static in the right speaker.

Currently we are running the Pismo successfully with one of the 256 RAM
chips in the top slot.

TIA,

Beverly
--
Beverly Woods
Low End Mac column: http://www.lowendmac.com/woods/index.html

-- 
G-Books is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
 -- Check our web site for refurbished PowerBooks  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

G-Books list info:      <http://lowendmac.com/lists/g-books.html>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[email protected]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>



---------------------------------------------------------------
iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com
---------------------------------------------------------------

Reply via email to