One of the things I find really irritating about printing in Jaguar is that print settings don't seem to 'stick' to a document, even if you just want to print it again. You have to reset everything if it isn't default.
A talked with a friend who says he does not have such problems. I'm using an Epson printer and thought it might be the driver rather than an operating system problem. But he says he is using an Epson too. He suggested there might be a setting somewhere that would allow settings to stick as they always do in 9. I haven't seen one. Any ideas? Another problem in 10.2.x (I'm up to 8) is that when there is a printer error, like running out of paper you have to start all over again. While in 9 you can easily resume after adding paper or clearing the jam. Is there a way to fix this in Jag? Rich (Beige MT, 466 G4, maxed Ram, Rev C rom etc) -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
