Help with X and 9.22 installation

[Tom W.]

I just got a B&W and put a sonnet ATA card in I got from a swapster. I 
booted from the System 9.1 CD and when I went to Disk Utiliites, it 
showed the 40 gig maxtor as a scsi drive (and not an IDE). I could see 
the partitions were still there from when I'd used it in my Beige, but I 
could not mount them, only initialize.

Then I booted from my G4 10.13 CD, and it showed the partitions as ATA 
under Disk Utilities. I installed X and then did the Panther upgrade. 
All four partitions were on the desktop and functioning properly.

But after that, I wanted to have 9.1 on and then upgrade to 9.2 so I 
could run classic apps, but when I boot from the 9.1 CD, still no 
partitions mount. They are there in Disk Utilities, but greyed out. I 
tried mounting them, but it said I was unable to do so.

Do I have to format the disk again from 9.1 and then re-install all over 
again?

Any help would be appreciated.
Thanks
Tom
--
G-List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics    http://www.smalldog.com | Refurbished Drives |
-- We have Apple Refurbished Monitors in stock!  |  & CDRWs on Sale!  |
     Support Low End Mac <http://lowendmac.com/lists/support.html>
G-List list info:       <http://lowendmac.com/lists/g-list.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com