I have a similar 9GB IBM SCSI HD in my PPC 9600 on the internal SCSI bus which works just fine as long as the SCSI ID numbers are set correctly and the termination is set correctly. I believe that the overall bus speed will be that of the slowest drive on the bus, but someone more knowledgeable than I may want to correct that statement if it's not correct. Best wishes, Don
Maaki wrote: > I have recently acquired a Rev.2 B&W G3 which came with a a single > 68pin SCSI drive running off an Apple/Adaptec OEM card. The label on > the HD reads: > > SCSI HD > IBM 309170 E182115 S > PN: 25L2310 > FRU: 25L3121 > > 9170MB > > This B&W G3 will replace a PM 9500. Last year I bought an internal 9 > GB 80->50 pin adapted IBM Ultrastar SCSI and installed it in the > 9500. The specific description for that drive from OWC was: > > 9GB IBM UltraStar 36LP 7200RPM 6.8MS > 4MB Buffer Low Profile UltraSCSI 50 Pin > (80 to 50 adapted). New with 1yr OWC Warranty. > -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
