Re: G3 desktop into tower

[Ron]

On Thursday, September 30, 2004, at 06:00 PM, l s wrote:
Greetings,
  I have a G3 DT that I would like to move into a G3
MT.  The MT is a Rev. 1  and the DT is Rev. 3.  What
do I need to do to make changes?  I want to be able to
use an additional drive, that is why I want to use the
MT.  Both have 266MHz processors.
Thanks,
Lee

You will want to keep the rev.2 for Slave drive support but you can add 
more drives to a DT case.
One will fit under the Zip slot and in the Zip slot if you don't have 
the Zip drive. There is also room to mount a drive to the side of the 
case where the PCI slots are
located. Just mount it to the inside of the metal case towards the 
front of the case from the PCI slots.

Or if the G3MT is ok, just swap the ROM chip from the DT into the MT 
and you can have a master/slave drive set-up.

Ron
--
G-List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics    http://www.smalldog.com | Refurbished Drives |
-- We have Apple Refurbished Monitors in stock!  |  & CDRWs on Sale!  |
     Support Low End Mac <http://lowendmac.com/lists/support.html>
G-List list info:       <http://lowendmac.com/lists/g-list.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com