Sorry for repost... Mail Server at work is acting up...
Will any G4 ZIF card go straigh into the B&W ??? - Quick Answer is Yes... But... Each ZIF has its own settings... For example. B&W has a FSB of 100 MHz Install a G3-233 Zif you will have to lower the FSB to 66 MHz Install a G4-1000 Zif (sonnet) you will have to lower the FSB to 66 MHz, or does the ZIF auto magically do it? Some ZIFs have Jumpers, some have switch blocks, some have no jumpers. Some Autodetect settings and some you need to play with the mother board jumpers. For a B&W you will have to install the latest apple firmware 1.1f??? I think and then apply a BIOS HACK. The B&W can accept a G4 but by default the G4 is disabled in the BIOS... (Apple's great marketting once again) To make a long story short... READ THE MANUAL THAT COMES WITH THE ZIF or you may have an crater where the ZIF used to be... -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
