Hey folks It seems my B&W has forgotten how to boot from a CD or DVD. Here's my config.:
B&W rev.1 G4/600 768MB RAM ACARD ATA-100+ The onboard ATA port has a 80GB drive used just for storage The ACARD has only 2 drives attached to it one has Panther the other has 9.2.2 I just installed an LG 4161B DVD Multi recorder (16X DVD+R). This replaced my other LG 4081B drive. I know the LG's are bootable since the 4081B booted both the Panther DVD and the 9.2 CD. Also the 4161B did boot the 9.2 CD, but since then I haven't had much luck booting from this drive. Also I re-installed the 4081B drive and it doesn't want to boot from a CD or DVD. BTW booting was done through the Startup disk, holding down the C key, and holding down the Option key. Each time the drive just spits the disk out. Any suggestions? -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
