On Oct 11, 2008, at 11:37 AM, insightinmind wrote:
> > > On Oct 11, 2008, at 11:25 AM, Doug Burton wrote: > >> >> Question 1: Will this card be properly recognized by 10.5.5 which is >> currently installed, or do I need to install the card and then re- >> install the OS? >> > > > I installed an ATI Radeon 9800 Pro under Leopard 10.5.5 and found the > Apple supplied drivers were the ones to use ... not any drivers > "supplied" by ATI (important point). My guess is that they are > already there? > > I just use the VGA connector. No info on DVI, except on other cards I > used a DVI to VGA converter so my monitor connection would fit > closer, as the VGA connector wasn't far enough away from the PCI slot > opening (on a PowerPC 8500/9500 using an ATI Radeon 7000ME). That was > a installation advantage for me at the time. > > Bill Connelly If you get the chance you might want to give the DVI a try Bill. Made a big difference in the sharpness of the image for me. I noticed a lot of jaggies with the VGA connection. JMHO Just a message from Doug... --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
