On Dec 11, 2008, at 2:39 PM, Dennis Myhand wrote:
> > Okay, I am working on getting FrankenMac into a case. Does anyone > know > where I can find out what pin on the front panel connection does what? > I have been to the xceler8 your mac site for the atx conversion info. > That got me a serial connector from a pc wired up to start the Mac. I > know that three is reset, five is power, eight is ground and nine is > power on led. And I am listing those from the wire on the ribbon > cable > with the red paint being one. Does anyone know where I can find what > one, two, four, six, and seven are? Thanks, Dennis in Edna > > Hi There, Here is what I have found so far on the web, not sure if it is helpful but it is a start. I have checked my pdf versions of the APG service manual and nothing there. Here is the link: http://homepage.mac.com/josephk/G4_led.html I also found a user that was able to find the information that you require. You might be able to email him here: [email protected] see his post here: http://forums.macrumors.com/showthread.php?t=108222 I'll post more as I find them. Regards, Darkwallmac --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
