From another thread contribution, I thought I'd ask more about it in  
a separate thread ...


I have a Yikes! oc'd successfully from 400 to 450 running XLR8 MACh  
Speed Control 3.4.2 as cpu monitor. It gives a cpu speed of 448.0 MHz  
and an L2 cache speed of 224.4 MHz. Mobo memory is 1024MB with a  
speed of 99.7MHz. For my G4 7400 cpu, it also estimates temperature  
(from my chilly Startup Room Temp of 16ªC (60.8ªF) to up and running  
awhile 24 (75.2).

For comparison, here is Xbench 1.3's System Info:

System Info             
        Xbench Version          1.3
        System Version          10.4.11 (8S165)
        Physical RAM            1024 MB
        Model                   PowerMac1,2
        Processor               PowerPC G4 @ 449 MHz
                Version         7400 (Max) v2.6
                L1 Cache        32K (instruction), 32K (data)
                L2 Cache        1024K @ 225 MHz
                Bus Frequency   100 MHz
        Video Card              ATY,RV100
        Drive Type              ST380021A

and Apple System Profiler's:

Hardware Overview:

   Machine Name:                Power Mac G3 (PCI graphics)
   Machine Model:       PowerMac1,2
   CPU Type:            PowerPC G4  (2.6)
   Number Of CPUs:      1
   CPU Speed:           450 MHz
   L2 Cache (per CPU):  1 MB
   Memory:              1 GB
   Bus Speed:           100 MHz
   Boot ROM Version:    1.1.2f2

Has anyone used XLR8 MACh Speed Control from daystar.com to control  
their upgrade or overclocking? It allegedly tests various L2 cache  
speeds and only uses a successful, maximum speed for it. A possible  
source of hangs if too fast?

I think of it as a safety net ... when oc'ing G4 cpu-s, IMO. Is this  
a good assumption?

When running under Apple's (non-XLR8) assigned cpu/L2 cache speeds,  
the system seems snappier, but the feel bothers me. Sort of makes me  
wonder, when is it going to hang ... (from previous experience on a  
PPC 8500 and cpu upgrades).

Any references about how it works? other info/comments?

Thanks.

Bill Connelly
artsite: http://mysite.verizon.net/moonstoneartstudio
myspace: http://www.myspace.com/moonstoneartstudio




--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a 
group for those using G3, G4, and G5 desktop Macs - with a particular focus on 
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---

Reply via email to