On 24 Feb 2009, at 10:28:57 PST, Will_i_am wrote:
> I've installed a SCSI-2 PCI card (Orange Micro) in my Beige G3 > Minitower in preparation for use of an external SCSI-2 drive. Other > than firmware updaters, is there anything I should be aware which is > necessary to do in order to connect the device and have it work > succesfully? What about SCSI IDs? Do I still use one of my 2 free > SCSI-buss IDs just as with SCSI-1? Thanks very much. ----------------- SCSI VooDoo being what it is, I THINK you have added an additional SCSI bus by installing the card. Thus, you have 7 more SCSI IDs to use. These SHOULD be separate from those for the logic board bus. Ken http://mysite.verizon.net/res7gt1w/stackomacs --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
