I have a gigabit 450 dual, I installed a second hard drive on. The original drive, a 20 gig, has OSX 10.4 installed, while the second drive, a 60 gig, has OSX10.2, OS10.3, and OS9.2 installed on three partitions. The OSes were installed while the drive was in a B & W. I can boot into the 10.2 and 10.3 partitions fine from OS 10.4, but 9.2 will not start. I attempted to reinstall OS 9 by booting from its install cd, but the computer can only see the 20 gig drive booting from cd -- the 60 gig drive is invisible. I have the second drive jumpered as a slave in the system. Any ideas how I can make the 60 gig visible from a cd boot so I can reinstall OS9?
Paul Riemerman --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
