On Jun 26, 2009, at 4:13 PM, Miguel Garcia Gell wrote:
> I have a G4 PCI Graphics with 400 Mghz and I'm looking for more > than 500 and less than 933 Mghz processor single or dual. > G4 Digital Audio processor doesn't work... wont fit... is out of > the list already. A 133 MHz Apple processor will only work in a 133 MHz Apple model. The board layout and the connector are specifically oriented to that these may not be installed on a 100 MHz Apple model. A 100 MHz Apple processor will only work in a 100 MHz Apple model, assuming it is one with the same high-density connector as employed on the 133 MHz processors. Again, the board layout and the connector are specifically oriented to that these may not be installed on a 133 MHz Apple model. > Any solution . A third-party processor with a high-density connector and a flexible power and cooling arrangement. Giga-Designs pioneered one version of these. OWC's are Giga's with the OWC label on them (and with OWC's restrictive covenants and different warranty on them). There may be others, but the Giga/OWC comes immediately yo mind Giga doesn't mind if you overclock their processors. Overclocking an OWC processor immediately voids its warranty. These Giga/OWC processors have jumpers for both the bus speed (133 MHz or 100 MHz) and the "divisor". Also the cache frequency and the "core" voltage for the several components on the board which operate at different "core" voltages. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com To unsubscribe from this group, send email to g3-5-list-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---