Hey Sam, I have 3 wires, one large black, one small red & one small black. I'm guessing that the two small wires get the switch, then what do I do with the bigger black wire? Jeff On Aug 26, 2009, at 1:56 PM, Sam Macomber wrote:
> > IIRC it's just a two wire momentary on switch. get a basic one from > your local electronic supply store (used to say radio shack, but they > carry so little of that kind of stuff any more) Only think to think > about is if you need to take the computer apart in the future so: A) > make the wires disconnectable or B) have the switch attached to the > innards and not the outer shell. > > -sam > >> >> Ok, just bought an emac on ebay that came with a bad power switch >> (yes, I tested it with my sisters emac switch) is there a way of >> bypassing the switch or possibly using something else to work the >> switch? I can solder? what say you.... Jeff >> >>> >> > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of the G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list -~----------~----~----~----~------~----~------~--~---