Hi, I have a PowerMac G4 (DA) that I've upgraded to an 800 MHz PowerLogix. The CPU upgrade has a wire with an adapter that I've attached and it works fine. Also, I've replaced the intake 120mm fan, it has long wires. Yet one more, I've added a PCI slot fan (Which I will probably remove) and it has a long wire on it also.
Anyway, I need to find a way to organize all these wires as it's gotten to be somewhat of a messy nest of wires. I've got some electrical tape I could use, but I don't know where to begin or if it's what I should be using for this organizing of wires. I don't have the most experience with the wires and organizing them. Any tips or suggestions, please? Thanks, Mike --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list -~----------~----~----~----~------~----~------~--~---
