Download CCC (Carbn Copy Cloner) and use CCC. It should do what you want.
Better, buy a used 50 pin IDE HD of lets say 40GB to 60GB. You can usually buy these for under $35.00 shipped. Format that slave HD with two partitions. Use CCC to copy from your Master 40GB HD to one of the partitions. Use CCC to copy form your 12GB HD to the same partition. Then boot from that slave HD, Etc. If it works, you will have an extra HD and can use the 12GB as a backup drive with OS 10.4.11 installed on it. Mel --- On Mon, 11/9/09, bkprolix <[email protected]> wrote: From: bkprolix <[email protected]> Subject: Multiple HDs & os x To: "G-Group" <[email protected]> Date: Monday, November 9, 2009, 12:12 AM I have a sawtooth 400, 1gig ram. I have a 12 gig drive & a 40 gig drive. I am running out of space on the 12 & would like to either move everything to the 40, or at least the user & Applications folders. I have dragged them to the 40, but it just copied them, leaving me with the same space problem as before. I have tried to reconfigure the pins on the 40, but it is not recognized as a bootable drive.The forty was taken out of an old dell & reformatted.I am running 10.4.11 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list -~----------~----~----~----~------~----~------~--~---
