System: G4 tower with X= 10.4 and 10.2 and 9 for that matter.
Decided to run using safe mode by using Apple+S at start up.
At command line after the # entered /sbin/fsck -y ran just fine in 10.4 but had
this problem in 10.2:
.
.
Checking Extended Attributes file
Invalid leaf record count
(It should be 6 instead of 986)
.
. **** FILE SYSTEM WAS MODIFIED ****
followed by
Volume was repaired successfully.
According to the instructions, this requires A REPEAT OF THE FSCK COMMAND until
fsck tells that the volume appears to be ok, first-pass repairs may uncover
issues, so repeat the command.
I did this 5 times but no change, still reporting 986 instead of 6.
Any ideas?
G4 450 MHz box with OS 8.1-9.2, X 10.2.8./ 10.4.11 AGP Graphics on a card. Both
are connected by 4 port LinkSys BEFSR41. 12 Gb hd in 4Gb and 8Gb partitions and
external 4Gb in 4 1Gb partitions. 470 Mb, Zip, fd, DVD/cd Drive, all are Apple
branded.
=======================================================================
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list
