Do you lose much in performance between RAID 5 and RAID 0+1? I got a brand new (factory sealed) Hard Drive Controller Card I don't think it does RAID but I paid like $20 for it off Craigslist. It supports ATA/ 133 since the default controller on board for the QuickSilver is only a ATA/66 maybe a ATA/100. Can you boot to RAID 0+1 if its done as a Software RAID?
On Mar 21, 7:51 pm, John Niven <[email protected]> wrote: > With four drives and Tiger you can do a RAID 0+1. Make two stripes, then > mirror them. It's not as efficient, but works. I use it on a G4 Xserve with > four 500Gb drives. > > The other idea that occurs is to get one of the RAID pci cards that were made > for the G5 Xserves. I think they might do what you want. They are for SATA > drives. I've seen them on eBay, but can be pricey. > > --- On Sun, 3/21/10, Albert Carter <[email protected]> wrote: > I am trying to setup a server on my QuickSilver DP 1.0 computer running > OS X Server 10.4.11. I would like to setup RAID 5. I have 4 160GB ATA/133 > Hard Drives for this purpose. However, I am have a very difficult time trying > to find any PCI RAID Controllers for IDE that support RAID 5. I would go > software route but it seems that Apple decided not to go the LVM router like > unix and linux does so there is no implementation of RAID 5 software wise. > I've heard of something called RAID-Z but that sounds like its only available > for Leopard or Snow Leopard. Does anyone have any suggestions or routes I can > try? > -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list To unsubscribe from this group, send email to g3-5-list+unsubscribegooglegroups.com or reply to this email with the words "REMOVE ME" as the subject.
