On Sep 19, 2010, at 7:23 AM, benreviug wrote: > Dear List, > > hi. sorry but I’ve really found this difficult to find info on the > net. My quicksilver has what looks like cable select cables for both > the hard drive bus and the dvd-r / zip bus, (blue connector for m/ > board, grey for slave, black for primary drive) so when using a new > hard drive should I > > 1. set the jumper settings (Seagate hard drives) to master ie > ( |: : : : ) and slave ( : : : : ) > Or, > > 2. set the jumpers to ‘cable select’ ( : |: : : ) on both? > > Sorry but a lot of conflicting info around. I would try cable select on both, all that maters is if they work. My PM MDD uses cable select throughout and I also use cable select on my Cubes.
John Carmonne Yorba Linda USA Sent from my MBP -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list
