Did you mean burns DVDs in 5 minutes? 5 hours seems a little slow.

I put a 22x DVD burner in my Quicksilver, it burns DVDs pretty fast.

Figured a dual g4-500 would have made a nice old OSX 10.3 machine for
utility work.

On Nov 20, 10:31 pm, Amanda Ward <[email protected]> wrote:
 On Nov 20, 2010, at 7:09 PM, Powermac wrote:

 > I snagged a G4-400 Sawtooth in the hopes of upgrading it to a dual
 > G4-500. Unfortunatly I didn't know you need a Uni-n rev 7 or higher
 > for the setup to work (the machine boots into OS 9.2.2 fine and System
 > profiler shows 2 x 500 CPUs with cache, but OSX installs kernal panic
 > on booting from the OS disk).

 > So what would be my options other then sticking the single G4-400 back
 > into the system? Are sawtooth motherboards with rev 7 chip common and
 > cheap? Will a newer motherboard (GiGE?) fit and work with the old PS?

 I too snagged a Sawtooth looking to upgrade. Had a Uni-n 5. Damn!
 Went to OWC and picked up a single Powerlogix 1.6 GHz processor.
 That was my main machine till the Intel iMac followed me home.
 Still a strong machine and my backup. Burns DVD's in about 5 hours.

 I control the Sawtooth, a Gig-E and Digital Audio from the iMac.

 Amanda

--
You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list

--
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list

Reply via email to