On Jun 2, 2011, at 8:43 PM, Valter Prahlad wrote:
The g4Port+LaserWriter work fine in OS9, but I would like to print
in OSX as
well - and I can't understand how to set it up.
Did you ever print in 10.4.11 on the old Beige, or with it printing in
OS 9 only also?
Below is an old article on serial printing in OS X. "Normal" serial
printing requires the installation of serial printing enabler
software. On this page, it says that the LaserWriter Select 310 (and
I'm guessing also your 360?) use a non-standard protocol for
communicating with the printer over a standard serial port & cable. I
was given an old LaserWriter Select in perfect condition, and I looked
into this once and determined it was too much work for me to mess
with, but it may be possible if you follow the links to the
information about the non-standard protocol. Here's a link to get you
started:
<http://webpages.charter.net/mbroughtn/serial_printing.html>
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list