I replaced the power supply on my DA with a regular $20 ATX supply modified according to the instructions at this link: http://atxg4.com/ Perhaps he is still selling the harnesses. ($20)
It works. If you compare the pinout diagrams you will note the differences between the various machines. The only thing I did differently was to use two 12 volt lines (instead of one); one was isolated for the 12 volt pin and one was used for the trickle line. If you bought an ATX to ATX connector harness and cut off one end you could do your soldering on the harness and simply plug in the power supply, with the ability to replace it if it failed. I have not put the DA in sleep mode but I do have a MDD with a similar ATX solution that sleeps and wakes reliably. Bruce On Sep 5, 12:49 am, [email protected] wrote: > > Is this 28v vitally important to operating the DA, or is it only needed > > for ADC monitors? > > Only employed by the ADC monitors. -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list
