>> I have old G3 B&W with SCSI marked drive that is bad. I called OWC for >> replacement and was told SCSI IS THE SAME AS ULTRA ATA DRIVE. I think >> this >> is wrong. > > Yup. They are completely different. > > However, the G3 *should* use an ATA drive normally, unless you have a SCSI > card installed. Do you?
In certain B&W (and Beige) G3 models, SCSI drives were offered as an option, which usually meant one or possibly two 9 GB Seagate drives and an Adaptec, but Apple-ROMed, UW-SCSI controller. At that time, SCSI was the performance option, and ATA was the low(er) cost option. The particular Adaptec controller used UW-SCSI drives, which have a 68-pin interface for a 16-bit-wide data path. Traditional SCSI has a 50-pin interface for an 8-bit-wide data path. OWC may not be the best place to look for SCSI drives. A possible alternative is the ACARD "SCSIDE" adapter, which allows you to connect an Ultra ATA (UATA) drive of truly un-SCSI-like capacity (nearly 1,000 GB) to the Mac's SCSI controller. -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list
