On Dec 1, 2014, at 4:58 PM, Robert H. Baucom <[email protected]> wrote:
> The HDD’s in my Quicksilver G4 are acting crazy. I have two new > MAXTOR ATA HDD > 160GB PATA 133 HDD > MODEL: 6L 160PS > SER# L30H7CVH > > But reading a Hard Drive installation Paper it says: For your drive to run in > this mode, you need the following: > • A computer that supports UDMA mode 5 > > Will my G4 with an Apple 933GHz board and running Leopard 10.5.8 run UDMA > MODE 5? The drives should work just fine, although they'll be limited to the throughput of the ATA adapter on the motherboard, which, iirc is ATA-100 not 133, which is what the UDMA spec is talking about: <http://en.wikipedia.org/wiki/UDMA> What do you mean 'acting crazy'? -- Bruce Johnson "Wherever you go, there you are." B. Banzai, PhD -- -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list --- You received this message because you are subscribed to the Google Groups "G-Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
