I take it back.  I had not noticed that exterior dust trap.  Dust bunnies?  
It was more like a dust toupée! In any case, it made all the difference.

Thanks for saving me machine,
Nick

On Wednesday, March 8, 2017 at 6:16:28 PM UTC-5, glenstrek wrote:
>
>
>
>
> ------------------------------
> *From:* nick.rhind <nick....@umassmed.edu <javascript:>>
> *To:* G-Group <g3-5...@googlegroups.com <javascript:>> 
> *Sent:* Wednesday, March 8, 2017 4:41 PM
> *Subject:* Fix or Replace 1GHz G4
>
> I have a 1GHz mirrored-door G4 (M8689) that I need to run a piece of 
> legacy lab equipment.  It boots up fine and seems to run well, but after 
> several minutes the monitor turns off and, a few moments later, the 
> computer shuts down.  For what it is worth, the fan has been running 
> constantly for the past few months.  If anyone has any advice about how to 
> repair the poor old thing, I would greatly appreciate it.  If not, 
> suggestions for a good source for a replacement would be useful.  My online 
> searches have not but fruitful.
>
>
> -------------------------------------------------------------------------------------------------------------
> It could be a power supply or maybe just an overheating problem.
>
> Years ago when I got a used MDD it had a huge build up of dust bunnies the 
> size of rodent mice underneath the Darth Vader grill at the bottom of the 
> tower. I blew them out with a commercial air compressor. They can be 
> removed manually if you have the patience. So, check for dust everywhere.
>
> If that does not work, depending on your software requirements older Intel 
> Mac's can run OS 10.5. When my G5 died I went to an older G4 and an Intel 
> iMac running 10.5 which worked for my legacy graphics software. --glen
>
>
>

-- 
-- 
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list

--- 
You received this message because you are subscribed to the Google Groups 
"G-Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to g3-5-list+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to