|
Hi,
I'm having problems with one PC that continually
displays "watchdog timeout" errors on the ethernet adapter.
Additionall, it does not receive an IP address form
the DHCP server. If manually setting an IP address, then the PC repeats the
watchdog timeout message every few seconds. This occurs with a 3Com card and a
Realtek8100 card.. However, the same cards are installed in other PCs and they
work.
Can anyone help ??
g4u ver: 2.1 (CD)
dmesg section (last tests with Realtek card
installed):
rtk0 at pci0 dev 12 function 0:
Realtek 8139 10/100baseTX
rtk0: interupting at
irq11
rtk0: Ethernet address (correct
MAC address)
ukphy0 at rtk0 phy 7: Generic
IEEE 802.3u media interface
ukphy0: OUI 0x000000, model
0x0000, rev 0
ukphy0: 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, auto
ifconfig rtk0:
rtk0: flags=8843 <UP,
BROADCAST, RUNNING, SIMPLEX, MULTICAST> mtu 1500
address: (correct MAC address)
media: Ethernet autoselect (100baseTX
full-duplex)
status: active
inet: (current manually set IP details)
Thanks in hope,
Jeff
|
- [g4u-help] Watchdog timeouts on ethernet Jeff
