Sorry to bother you.
I am trying to get a laptop to work with G4U and a PCMCIA NIC. The NIC in
question is a 3Com Etherlink III PC CARD, model number 3c562C/3C563C. I've used
DMESG to try and figure out what's gone wrong but can't make head not tail of
the output.
Thanks
Neil
CHP
Consulting
Neil Grinnall
Neil Grinnall
Senior Technical Operations Engineer
Tel: +44 (0)20 7588 1800
Fax: +44 (0)20 7588 1802
CHP Consulting, Augustine House, 6a Austin Friars, London EC2N 2HA
email: [EMAIL PROTECTED]
web: www.chp.co.uk
The contents of this communication are not intended to be binding or constitute any form of offer or acceptance or give rise to any legal obligations on behalf of the sender or CHP Consulting. The views or opinions expressed represent those of the author and not necessarily those of CHP Consulting. This email and any attachments are strictly confidential and are intended solely for use by the individual or entity to whom it is addressed. If you are not the addressee (or responsible for delivery of the message to the addressee) you may not copy, forward, disclose or use any part of the message or its attachments. At present the integrity of email across the internet cannot be guaranteed and messages sent via this medium are potentially at risk. All liability is excluded to the extent permitted by law for any claims arising as a result of the use of this medium to transmit information by or to CHP Consulting or its affiliates.
_______________________________________________ g4u-help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/g4u-help
