On Tue, 20 Jun 2006, Jaffa Bobfluff wrote: > the follwing six start wd1. The drives are Western Digital 80GB SATA (can't > remeber the exact model) connected to the onboard highpoint RAID controller > HPT374. Is it possible to use this configuration with you application?
Sure, you can just copy the single disks and be happy. I don't know more about the HPT374, but my guess is that it needs some firmware download from the operating system to operate in RAID0 mode. Seeing the relevant lines from 'dmesg' may be useful. See also http://www.feyrer.de/g4u/#bugreporting > I'd also like to know if your app is compatible with .gz images created by > the windows util "Self Image"? g4u uses full disk images, starting from byte 0 to the last byte, and then compresses them using gzip. Whether or not that's compatible wo the Windows "Self Image" utility remains as a question to the authors of that software, I cannot answer it. - Hubert _______________________________________________ g4u-help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/g4u-help
