I tried both v2.2 and 2.3alpha and had no luck. This time the main screen doesn't show up.
The error message is the same on both new versions: When recognizing all the hardware these lines appear -and they are the last lines before freezing-:
...
...
8 ports with 8 removables, self powered
...
uhci1: host controller halted
...
uhub4:port3, device disappeared after reset
...
wd0 at atabus1 drive 0: <SAMSUNG HD160JJ/P>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149GB 310019 cyl, 16 head, 63 sec, 512 bytes/sect x 31250000 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub1: device problem, disabling port 1
Any ideas??
Thank you,
Edwin.
Hubert Feyrer <[EMAIL PROTECTED]> escribió:
On Wed, 21 Jun 2006, Edwin Obando wrote:
> The problems comes up after booting with the g4u CD. Everything seems fine since it displays a few messages about "usb ports detected, etc" and the "Welcome to g4u..." message shows up. The thing is that the keyboard won't work. Is it a known bug of this version on recognizing the usb keyboards??
Check out g4u version 2.2, which is the latest one.
If that does not work, try the 2.3alpha2 available at
http://www.feyrer.de/g4u/g4u-2.3alpha2.iso.
Please let me know if either version works/doesn't work!
- Hubert
Do You Yahoo!? La mejor conexión a Internet y 2GB extra a tu correo por $100 al mes. http://net.yahoo.com.mx
All the advantages of Linux Managed Hosting--Without the Cost and Risk! Fully trained technicians. The highest number of Red Hat certifications in the hosting industry. Fanatical Support. Click to learn more http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
_______________________________________________ g4u-help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/g4u-help
