OK, didn't see that... But, I'm surprised there is anything much there that is relevant to the NIC and how it functions on the network.
What g4u version do you use The latest downloaded, g4u 2.2 CD ISO What exact command(s) did you use Slurppart 192.168.16.2 c_drive.gz wd0e Ifconfig -a Ifconfig fd0e 192.168.16.254 netmask 255.255.255.0 What exact output did you get (all of it, 1:1, no interpretation on your own)? All tests and observing the g4u setup indicates that no DHCP address was acquired. You can see numerous attempts to acquire a DHCP address without success If the system hangs during boot: what are the last five lines printed on the screen (again all three of them, verbatime) No hanging What does "disks" say? "parts"? FWIW, this is the readout, but the disk and partitions are read fine. Disks Wd0 at atabus0 drive 0: <FUJITSU MHV2200BT PL> Wd0 drive suports 16-sector PIO transfers, LBA48 addressing Wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors Wd0: drive suports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (I'll skip the partition info unless you <really> think you need it...) If you have some problems with some network card or disk driver, please include the relevant parts from "dmesg" output (scroll down with 'space') Intel i82573L Gigabit Ethernet (ethernet network) at pci2 dev0 function 0 not configured (I don't see any other lines that either report an error or likely relate to a networking problem) What operating system, filesystem type and FTP server software do you use on your FTP server? XP SP2, NTFS, Win2K3 FTP Server HTH, TZU -----Original Message----- From: Hubert Feyrer [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 24, 2006 2:45 PM To: Tony Su Cc: [email protected] Subject: Re: [g4u-help] Does not support Intel Pro/1000 PL Network Adapter On Tue, 24 Oct 2006, Tony Su wrote: > Have verified this is an adapter support issue... Booting the same > machine into Windows works fine. > > Booting into g4u successfully, but cannot communicate over the > network. > > Running ifconfig -a, verifies that the network adapter did not > successfully acquire a DHCP address (also DHCP fails repeatedly during > bootup detection/configuration) Tried manually configuring an address, > but still cannot communicate on the network. > > G4u works fine acquiring a DHCP address from 2 other boxes, but not > this one, a laptop. Please provide the data requested at http://www.feyrer.de/g4u/#bugreporting, it's impossible to say anything without that - Hubert ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ g4u-help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/g4u-help
