Re: [g4u-help] dell precision 390

Fri, 03 Nov 2006 13:45:35 -0800

Upgrade to at least the current 2.2 release at
   http://www.feyrer.de/g4u/#reqs

may need to go to the current 2.3alpha6
    staring at the above page I presume
    http://www.feyrer.de/g4u/g4u-2.3alpha6.iso
  
wish the was a link somewhere on the above page
for the current alphal

On 11/3/06, Vinh Nguyen <[EMAIL PROTECTED]> wrote:
g4u 2.2alpha6 not seeing network card

    *   What g4u version do you use
        2.2 alpha6

    * What exact command(s) did you use
        ifconfig -a
    * What exact output did you get (all of it, 1:1, no interpretation on your own)?
        fwip0: flags=8843<UP,BROADCAST,RUNNING,XIMPLEX,MULTCAST> MTU1500
        address: 00:00:d1(etc....)
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        lo0: flags=8048<LOOPBACK,RUNNING,MULTICAST> mtu 33192

    * If the system hangs during boot: what are the last five lines printed on the screen (again all three of them, verbatime)
        NA

    * What does "disks" say? "parts"?
        disks:  sd0 at scsibus0 target 0 lun 0: <TEAC,USB HS-CF Card, 4.00> disk removable
                sd0: drive offline
                sd1 at scsibus0 target 0 lun 1: <TEAC, USB HS-xD/SM, 4.00> disk removable
                sd1: drive offline
                sd2 at scsibus0 target 0 lun 2: <TEAC, USB HS-MS Card, 4.00> disk removable
                sd2: drive offline
                sd3 at scsibus0 target 0 lun 3: <TEAC, USB HS-SD Card, 4.00> disk removable
                sd3: drive offline
                sd0(umass0:0:0:0):  Check condition on CDB: 0x00 00 00 00 00 00
                sd1(umass0:0:0:1):  Check condition on CDB: 0x00 20 00 00 00 00         sd2(umass0:0:0:0):  Check condition on CDB: 0x00 40 00 00 00 00         sd3(umass0:0:0:0):  Check condition on CDB: 0x00 60 00 00 00 00         sd0(umass0:0:0:0):  Check condition on CDB: 0x00 00 00 00 00 00         sd1(umass0:0:0:0):  Check condition on CDB: 0x00 20 00 00 00 00         sd2(umass0:0:0:0):  Check condition on CDB: 0x00 40 00 00 00 00         sd3(umass0:0:0:0):  Check condition on CDB: 0x00 60 00 00 00 00

        parts: typed( parts sd0) got (get label: operation not supported by device)

    * If you have some problems with some network card or disk driver, please include the relevant parts from "dmesg" output (scroll down with 'space')
        Broadcom product 0x167a (ethernet network, revision 0x02) at pci4 dev 0 function 0 not configured
        Intel 82801GB/GR AHCI SATA Controller (SATA mass storage, interface 0x01,revision 0x01) at pci0 dev 31 function 2 not configured
        Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured

    * What operating system, filesystem type and FTP server software do you use on your FTP server?

        FTP SERVER runs Mac OS Tiger with default ftp software.

Thanks
--
++++++++++++++++++++++++++++++++
Vinh Nguyen
Ph: 650-966-5038
Cell: 408-603-8030


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier

Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo


http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

_______________________________________________
g4u-help mailing list


[email protected]
https://lists.sourceforge.net/lists/listinfo/g4u-help





-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
g4u-help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/g4u-help

Reply via email to