Hi,
I would like to submit a dmesg script for a Dell Power Edge 1435
server - it would be good if this could be included in the supported
lineup of new Dell servers.
MB
I appeand the dmesg file for reference (Using G4U 2.2 beta3):
Scroll down with SPACE or RETURN, press 'q' to quit!
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005, 2006
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.6 (G4U-KERNEL) #1: Tue Dec 12 11:59:50 MET 2006
[EMAIL
PROTECTED]:/home/cvs/src-g4u/sys/arch/i386/compile/obj.i386/G4U-KERNEL
total memory = 1022 MB
avail memory = 998 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfaab0
PCI BIOS rev. 3.0 found at 0xfab19
pcibios: config mechanism [1][x], special cycles [x][x], last bus 7
PCI IRQ Routing Table rev. 1.0 found at 0xfa840, size 224 bytes (12
entries)
PCI Interrupt Router at 000:02:2 (ServerWorks product 0x0234
compatible)
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x1166 product
0x0234
Warning: unable to fix up PCI interrupt routing
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Unknown K7 (Athlon) (686-class), 1800.23 MHz, id 0x40f12
cpu0: features
ffdbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features ffdbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features ffdbfbff<FXSR,SSE,SSE2,B27,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2 2001<SSE3>
cpu0: "Dual-Core AMD Opteron(tm) Processor 2210"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 1 MB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 1 function 0: ServerWorks product 0x0036 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 13 function 0: ServerWorks product 0x0104 (rev. 0xc0)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
pciide0 at pci1 dev 14 function 0
pciide0: ServerWorks product 0x024b (rev. 0x00)
pciide0: bus-master DMA support present, but unused (no driver
support)
pciide0: primary channel configured to native-PCI mode
pciide0: using irq 6 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus1 at pciide0 channel 1
pchb0 at pci0 dev 2 function 0
pchb0: ServerWorks product 0x0205 (rev. 0x00)
pciide1 at pci0 dev 2 function 1
pciide1: ServerWorks product 0x0214 (rev. 0x00)
pciide1: bus-master DMA support present, but unused (no driver
support)
pciide1: primary channel configured to compatibility mode
pciide1: primary channel interrupting at irq 14
atabus2 at pciide1 channel 0
pciide1: secondary channel configured to compatibility mode
pciide1: secondary channel ignored (not responding; disabled or no
drives?)
pcib0 at pci0 dev 2 function 2
pcib0: ServerWorks product 0x0234 (rev. 0x00)
ohci0 at pci0 dev 3 function 0: ServerWorks product 0x0223 (rev. 0x01)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1: ServerWorks product 0x0223 (rev. 0x01)
ohci1: interrupting at irq 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 2: ServerWorks product 0x0223 (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ServerWorks EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vga1 at pci0 dev 4 function 0: ATI Technologies product 0x515e (rev.
0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb2 at pci0 dev 7 function 0: ServerWorks product 0x0140 (rev. 0xa2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 8 function 0: ServerWorks product 0x0142 (rev. 0xa2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci4 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge0: interrupting at irq 5
bge0: pcie mode=0x105000
bge0: ASIC unknown BCM575x family (0x4201), Ethernet address
00:18:8b:76:92:42
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb4 at pci0 dev 9 function 0: ServerWorks product 0x0144 (rev. 0xa2)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
bge1 at pci5 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge1: interrupting at irq 10
bge1: pcie mode=0x105000
bge1: ASIC unknown BCM575x family (0x4201), Ethernet address
00:18:8b:76:92:43
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb5 at pci0 dev 10 function 0: ServerWorks product 0x0142 (rev. 0xa2)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 11 function 0: ServerWorks product 0x0144 (rev. 0xa2)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev.
0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev.
0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev.
0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
kbc: cmd word write error
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "TSC" frequency 1800160170 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
md0: internal 2000 KB image area
uhub3 at uhub0 port 2
uhub3: HP Multimedia Keyboard Hub, class 9/0, rev 1.10/0.01, addr 2
uhub3: 3 ports with 2 removable, bus powered
uhub4 at uhub2 port 3
uhub4: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <WDC WD800JD-75MSA3>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133)
atapibus0 at atabus2: 2 targets
atapibus0 drive 0: <HL-DT-ST GCR-8240N, , 1.10> cdrom removable not
configured
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: HP Multimedia Keyboard Hub, rev 1.10/0.01, addr 3, iclass 3/1
ukbd0 at uhidev0
uhidev1 at uhub4 port 1 configuration 1 interface 0
uhidev1: Logitech N48, rev 1.00/4.01, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev2 at uhub3 port 1 configuration 1 interface 1
uhidev2: HP Multimedia Keyboard Hub, rev 1.10/0.01, addr 3, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=3, output=1, feature=1
umass0 at uhub4 port 2 configuration 1 interface 0
umass0: KINGSTON USB DRIVE, rev 1.10/0.01, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <KINGSTON, USB DRIVE, 1.12> disk
removable
sd0: 246 MB, 984 cyl, 16 head, 32 sec, 512 bytes/sect x 503808 sectors
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 14 days
WARNING: CHECK AND RESET THE DATE!
bge1: pcie mode=0x105000
bge0: pcie mode=0x105000
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
g4u-help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/g4u-help
