When booting to the CD it does not work. it seems to accept the hard disk fine, but the CDROM is sata as well, and seems to be where the problems arise.
Here is the output: wd0 at atabus 0 drive 0 <stuph> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 76293 MB, 15509 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(viaide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1 at atabaus0 drive 0; <ST506> wd1: drive supports 1-sector PIO transfers, chs add 69632 KB, 1024 cyl, 8 head, 17 sec, 512 bytes/sect x 139264 sectors wd1(viaide0:1:0): using PIO mode 0 viaide0:1:0: wait timeout wd1d: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying (repeats last 2 until it does this:) wd1: dos partition I/O error (then continues with those last 2 again) I checked in the BIOS for a sata operations setting of "combination.. and the only options were raid on/off anyone? -greg -- “While it is possible to change without improving, it is impossible to improve without changing.” -anonymous “only he who attempts the absurd can achieve the impossible.” -anonymous ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ g4u-help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/g4u-help
