Trying the 2.3 ISO and I'm getting 53-54 MB/s much more in line with what I thought I would get.
Sorry about using the wrong image. You might move it a little lower on the page to keep others from making the mistake I made.. Troy On Sat, Mar 17, 2007 at 02:54:36PM -0500, Troy D. Miller wrote: > Yes, they are all auto. Even tired forcing it to > a PIO mode 4, but no change in MB/s. > > Probably has to do with SATA ports on the Nforce4 > chipset or having a mixed 1.5 and 3.0 SATA drives. > > Never mind, I just checked the downloaded image it appears > to be 1.17. I'll try 2.3, I meant to use 2.3. > > Sorry for about that. > > Troy > > On Sat, Mar 17, 2007 at 08:44:04PM +0100, Samy RABIH wrote: > > I had transfer speed problems with old version of g4u on HP workstations but > > with last, it was faster :) > > Have you verified your motherboard bios settings? > > > > -----Message d'origine----- > > De : Troy D. Miller [mailto:[EMAIL PROTECTED] > > Envoyé : samedi 17 mars 2007 20:30 > > À : [email protected] > > Cc : [EMAIL PROTECTED] > > Objet : Re: [g4u-help] Slow disk 2 disk copy > > > > I used version 2.3 ISO image. > > > > I gave up and used the free version of xxclone. > > It would have taken 15+ hours. However, I > > haven't tried to boot the duplicate yet. > > > > Troy > > > > On Fri, Mar 16, 2007 at 11:48:27PM +0100, Samy RABIH wrote: > > > Which version of g4u do you use? > > > > > > -----Message d'origine----- > > > De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la > > > part de Troy D. Miller > > > Envoyé : vendredi 16 mars 2007 20:58 > > > À : [email protected] > > > Objet : [g4u-help] Slow disk 2 disk copy > > > > > > I've got DFI LanParty based on the N4Force chip set. > > > I'm only getting 4.5 MB/s for diskcopy between to > > > local SATA disks. Is there anyway to force > > > bus-master DMA support? > > > > > > Troy > > > > > > > > > dmesg shows: > > > > > > pciide1 at pci0 dev 7 function 0 > > > pciide1: vendor 0x10de product 0x0054 (rev. 0xa3) > > > pciide1: bus-master DMA support present, but unused (no driver support). > > > pciide1: primary channel wired to native-PCI mode > > > pciide1: using irq 11 for native-PCI interrupt > > > atabus1 at picide1 channel 0 > > > > > > ------------------------------------------------------------------------- > > > Take Surveys. Earn Cash. Influence the Future of IT > > > Join SourceForge.net's Techsay panel and you'll get the chance to share > > your > > > opinions on IT & business topics through brief surveys-and earn cash > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > _______________________________________________ > > > g4u-help mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/g4u-help > > > > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ g4u-help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/g4u-help
