Hallo,
Habe ein Notebook (HP NC 6400), wollte die Disk clonen, g4u Version 2.3
Boot erfolgreich.
....
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
Broadcom BCM5753M 10/100/1000 Ethernet (ethernet network, revision 0x21) at pci1
dev0 function0 not configured
ppb1 at pci0 dev 28 function 1: Intel 82891GB/GR OCI Express Port #2 (rev.0x01)
pci2 at ppb1 bus2
....
....
g4u>ifconfig -a
wpi0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ssid ""
powersave off
addres: 00:19:.....
media: IEEE802.11 autoselect
lo: flags=8848<LOOPBACK,RUNNING,MULTICAST> mtu 33192
"ifconfig -C" zeigt ausser dem Loopback Adapter keine konfigurierbaren
Netzwerkadapter an
g4u>ifconfig -C
lo
Lässt sich da ein anderer Treiber einbinden?
SATA erkannt, disks und parts disk (wp0) zeigne Disk und Partitionen korrekt an.
;-)
Gruss und Dank - Frido
Intelligence Applied
.................................................................................................................................................................................
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
g4u-help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/g4u-help
