Dylan, The issue is your: JMicron PCIE to SATA/IDE raid controller BIOS 1.06.69
The JMicron's have mediocre BSD support, but I believe this *should* work if you change the controller mode to IDE Compatible in your BIOS. This will obviously negate whatever benefit you are getting with the raid functionality, but that is an unfortunate problem with Hardware-assisted software raids, as these types of controllers have come to be called. Matt Smollinger Application Engineer for Convergence Tech. AdvancedAV --Sent from my webmail. I have limited access to both e-mail and voicemail.-- -----Original Message----- From: [EMAIL PROTECTED] on behalf of Dylan Haines Sent: Mon 11/26/2007 1:57 PM To: [email protected] Subject: [g4u-help] G4U Alpha 2.4 hanging at boot ASUS P5K ACPI bios rev 0603 Motherboard Intel Core2 6600@ 2.4 GHZ SATA drive JMicron PCIE to SATA/IDE raid controller BIOS 1.06.69 DDR2-667 ram, 2GHZ Last 5 lines on screen when boot hangs: uhidev0 at uhub1 port 2 configuration 1 interface 0 uhidev0: Logitech USB-PS/2 optical mouse rev 2.00 addr 2 class 3/1 ums0 at uhidev0; 3 button a Z dir wsmouse 0 at ums0 mux 0 wd0 at atabus3 drive 0 Same thing without USB when O try without mouse connected. Dylan Haines Systems Technical Support Manager HB Studios Multimedia Ltd. Box 725, The Hive 37 Hall Street Lunenburg, NS B0J 2C0 Tel: (902)634-8316 Fax: (902)634-3647 <blocked::http://www.hb-studios.com/> www.hb-studios.com ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ g4u-help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/g4u-help
