I tried to use G4U on Dell hardware like Precision T3400 and R5400. After
booting from G4U disks command displays nothing. Below is the output of
dmesg
Scroll down with SPACE or RETURN, press 'q' to quit!
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.49 (G4U-KERNEL) #0: Sat Jan 19 22:30:00 CET 2008
[EMAIL PROTECTED]:/Volumes/maxi/cvs/src-g4u/sys/arch/i386/compile/obj/G4U-KE
RNEL
total memory = 3325 MB
avail memory = 3255 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Precision WorkStation R5400
PCI BIOS rev. 2.1 found at 0xfb7ce
pcibios: config mechanism [1][x], special cycles [x][x], last bus 9
PCI IRQ Routing Table rev. 1.0 found at 0xfed10, size 304 bytes (17 entries)
PCI Interrupt Router at 000:31:0 (Intel 63xxESB LPC Interface Bridge
compatible)
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x8086 product
0x2670
Warning: unable to fix up PCI interrupt routing
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Pentium III (Katmai) (686-class), 2660.11 MHz, id 0x10676
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2
ce3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
cpu0: features3 20100000<XD,EM64T>
cpu0: "Intel(R) Xeon(R) CPU E5430 @ 2.66GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: ITLB 128 4 KB entries 4-way
cpu0: using thermal monitor 1
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: Core ID 0
cpu0: SMT ID 0
cpu0: calibrating local timer
cpu0: apic clock running at 332 MHz
timecounter: Timecounter "lapic" frequency 332500123 Hz quality 2100
cpu1 at mainbus0 apid 2: (application processor)
cpu1: not started
cpu2 at mainbus0 apid 1: (application processor)
cpu2: not started
cpu3 at mainbus0 apid 3: (application processor)
cpu3: not started
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 9: pa 0xfec88000, version 20, 24 pins
ioapic2 at mainbus0 apid 10: pa 0xfec89000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <DELL , B9K ,00000015>, AslId <ASL ,00000061>
mpacpi: could not get bus number, assuming bus 0
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU4 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU5 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU6 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU7 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (VBTN, PNP0C0C): ACPI Power Button
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
MBIO (PNP0C01) [System Board] at acpi0 not configured
DMA (PNP0200) [AT DMA Controller] at acpi0 not configured
FPU (PNP0C04) [Math Coprocessor] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
SPK (PNP0800) [AT-style speaker sound] at acpi0 not configured
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x5f irq 0
COMA (PNP0501) [16550A-compatible COM port] at acpi0 not configured
COMB (PNP0501) [16550A-compatible COM port] at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKE (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
HPET (PNP0103) [HPET Timer] at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x4001 (rev. 0x20)
ppb0 at pci0 dev 1 function 0: Intel product 0x4021 (rev. 0x20)
ppb0: unuspported PCI Express version
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: NVIDIA product 0x061a (rev. 0xa2)
vga1: WARNING: ignoring 64-bit BAR @ 0x14
vga1: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
ppb1 at pci0 dev 5 function 0: Intel product 0x4025 (rev. 0x20)
ppb1: unuspported PCI Express version
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 9 function 0: Intel product 0x4029 (rev. 0x20)
ppb2: unuspported PCI Express version
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: Intel 63xxESB PCI Express Upstream Port (rev.
0x01)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci4 dev 0 function 0: Intel 63xxESB PCI Express Downstream Port #1
(rev. 0x01)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci3 dev 0 function 3: Intel 63xxESB PCI Express to PCI-X Bridge
(rev. 0x01)
ppb5: disabling notification events
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 16 function 0
pchb1: Intel product 0x4030 (rev. 0x20)
pchb2 at pci0 dev 16 function 1
pchb2: Intel product 0x4030 (rev. 0x20)
pchb3 at pci0 dev 16 function 2
pchb3: Intel product 0x4030 (rev. 0x20)
pchb4 at pci0 dev 16 function 3
pchb4: Intel product 0x4030 (rev. 0x20)
pchb5 at pci0 dev 16 function 4
pchb5: Intel product 0x4030 (rev. 0x20)
pchb6 at pci0 dev 17 function 0
pchb6: Intel product 0x4031 (rev. 0x20)
pchb7 at pci0 dev 21 function 0
pchb7: Intel product 0x4035 (rev. 0x20)
pchb8 at pci0 dev 21 function 1
pchb8: Intel product 0x4035 (rev. 0x20)
pchb9 at pci0 dev 22 function 0
pchb9: Intel product 0x4036 (rev. 0x20)
pchb10 at pci0 dev 22 function 1
pchb10: Intel product 0x4036 (rev. 0x20)
Intel 63xxESB High Definition Audio Controller (multimedia subclass 0x03,
revision 0x09) at pci0 dev 27 function 0 not configured
ppb6 at pci0 dev 28 function 0: Intel 63xxESB PCI Express Port #1 (rev.
0x09)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci7 dev 0 function 0: Broadcom BCM5754 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 16 (irq 11)
bge0: ASIC BCM5754/5787 A2 (0xb002), Ethernet address 00:21:9b:45:59:cd
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5754/5787 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb7 at pci0 dev 28 function 1: Intel 63xxESB PCI Express Port #2 (rev.
0x09)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
bge1 at pci8 dev 0 function 0: Broadcom BCM5754 Gigabit Ethernet
bge1: interrupting at ioapic0 pin 17 (irq 10)
bge1: ASIC BCM5754/5787 A2 (0xb002), Ethernet address 00:21:9b:45:59:cb
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5754/5787 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 63xxESB USB UHCI Controller (rev.
0x09)
uhci0: interrupting at ioapic0 pin 21 (irq 9)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 63xxESB USB UHCI Controller (rev.
0x09)
uhci1: interrupting at ioapic0 pin 22 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 63xxESB USB UHCI Controller (rev.
0x09)
uhci2: interrupting at ioapic0 pin 18 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 63xxESB USB UHCI Controller (rev.
0x09)
uhci3: interrupting at ioapic0 pin 23 (irq 9)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 63xxESB USB EHCI Controller (rev.
0x09)
ehci0: interrupting at ioapic0 pin 21 (irq 9)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb8 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xd9)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0
pcib0: Intel 63xxESB LPC Interface Bridge (rev. 0x09)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel ignored (disabled)
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
Intel product 0x2682 (RAID mass storage, revision 0x09) at pci0 dev 31
function 2 not configured
ichsmb0 at pci0 dev 31 function 3: Intel 63xxESB SMBus Controller (rev.
0x09)
ichsmb0: interrupting at ioapic0 pin 17 (irq 10)
iic0 at ichsmb0: I2C bus
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer1
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "TSC" frequency 2660133760 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
md0: internal 2000 KB image area
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 297 days
WARNING: CHECK AND RESET THE DATE!
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Dell Dell Premium USB Optical Mouse, rev 2.00/0.09, addr 2, iclass
3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhidev1 at uhub1 port 2 configuration 1 interface 0
uhidev1: Dell Dell USB Keyboard, rev 1.10/3.06, addr 2, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: Lexar JD Lightning II, rev 2.00/11.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Lexar, JD Lightning II, 1100> disk
removable
sd0: fabricating a geometry
sd0: 1912 MB, 1912 cyl, 64 head, 32 sec, 512 bytes/sect x 3915776 sectors
sd0: fabricating a geometry
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
g4u-help mailing list
g4u-help@feyrer.de
https://lists.sourceforge.net/lists/listinfo/g4u-help
