Scroll down with SPACE or RETURN, press 'q' to quit!
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.3 (G4U-KERNEL) #6: Fri Nov 21 00:47:24 CET 2008
[email protected]:/Volumes/maxi/cvs/src-g4u/sys/arch/i386/compile/obj.i386/G
4U-KERNEL
total memory = 2042 MB
avail memory = 1998 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. PowerEdge 1950
PCI BIOS rev. 2.1 found at 0xfb02e
pcibios: config mechanism [1][x], special cycles [x][x], last bus 14
PCI IRQ Routing Table rev. 1.0 found at 0xfa850, size 320 bytes (18 entries)
PCI Interrupt Router at 000:31:0 (Intel 63xxESB LPC Interface Bridge
compatible)
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x8086 product
0x2670
Warning: unable to fix up PCI interrupt routing
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x269e new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x269e new address 0x00005808
pci_addr_fixup: 000:31:1 0x8086 0x269e new address 0x00005810
pci_addr_fixup: 000:31:1 0x8086 0x269e new address 0x0000580c
cpu0 at mainbus0 apid 0: Intel 686-class, 1995MHz, id 0x1067a
cpu1 at mainbus0 apid 2: Intel 686-class, 1995MHz, id 0x1067a
cpu2 at mainbus0 apid 1: Intel 686-class, 1995MHz, id 0x1067a
cpu3 at mainbus0 apid 3: Intel 686-class, 1995MHz, id 0x1067a
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL ,PE_SC3 ,00000001>, AslId <DELL,00000001>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
FPU (PNP0C04) [Math Coprocessor] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x5f irq 0
COMA (PNP0501) [16550A-compatible COM port] at acpi0 not configured
COMB (PNP0501) [16550A-compatible COM port] at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
apm0 at acpi0: Power Management spec V1.2
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 5000X Memory Controller Hub (rev. 0x12)
ppb0 at pci0 dev 2 function 0: Intel 5000 Series Chipset PCI Express x4 Port
2 (rev. 0x12)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: Intel 63xxESB PCI Express Upstream Port (rev.
0x01)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: Intel 63xxESB PCI Express Downstream Port #1
(rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to
PCI-X Bridge (rev. 0xc3)
ppb3: disabling notification events
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bnx0 at pci4 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx0: Ethernet address 00:21:9b:8b:ad:c6
brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb4 at pci2 dev 1 function 0: Intel 63xxESB PCI Express Downstream Port #2
(rev. 0x01)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci1 dev 0 function 3: Intel 63xxESB PCI Express to PCI-X Bridge
(rev. 0x01)
ppb5: disabling notification events
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 3 function 0: Intel 5000 Series Chipset PCI Express x4 Port
3 (rev. 0x12)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci0 dev 4 function 0: Intel 5000 Series Chipset PCI Express x8 Port
4-5 (rev. 0x12)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci0 dev 5 function 0: Intel product 0x25e5 (rev. 0x12)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci0 dev 6 function 0: Intel 5000 Series Chipset PCI Express x8 Port
6-7 (rev. 0x12)
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ppb10 at pci0 dev 7 function 0: Intel 5000 Series Chipset PCI Express x4
Port 7 (rev. 0x12)
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 16 function 0
pchb1: Intel 5000 Series Chipset FSB Registers (rev. 0x12)
pchb2 at pci0 dev 16 function 1
pchb2: Intel 5000 Series Chipset FSB Registers (rev. 0x12)
pchb3 at pci0 dev 16 function 2
pchb3: Intel 5000 Series Chipset FSB Registers (rev. 0x12)
pchb4 at pci0 dev 17 function 0
pchb4: Intel 5000 Series Chipset Reserved Registers (rev. 0x12)
pchb5 at pci0 dev 19 function 0
pchb5: Intel 5000 Series Chipset Reserved Registers (rev. 0x12)
pchb6 at pci0 dev 21 function 0
pchb6: Intel 5000 Series Chipset FBD Registers (rev. 0x12)
pchb7 at pci0 dev 22 function 0
pchb7: Intel 5000 Series Chipset FBD Registers (rev. 0x12)
ppb11 at pci0 dev 28 function 0: Intel 63xxESB PCI Express Port #1 (rev.
0x09)
pci12 at ppb11 bus 12
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
ppb12 at pci12 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E
to PCI-X Bridge (rev. 0xc3)
ppb12: disabling notification events
pci13 at ppb12 bus 13
pci13: i/o space, memory space enabled, rd/line, wr/inv ok
bnx1 at pci13 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx1: Ethernet address 00:21:9b:8b:ad:c4
brgphy1 at bnx1 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 63xxESB USB UHCI Controller (rev.
0x09)
uhci0: interrupting at ioapic0 pin 21
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 63xxESB USB UHCI Controller (rev.
0x09)
uhci1: interrupting at ioapic0 pin 20
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 63xxESB USB UHCI Controller (rev.
0x09)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: Intel 63xxESB USB UHCI Controller (rev.
0x09)
uhci3: interrupting at ioapic0 pin 20
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 63xxESB USB EHCI Controller (rev.
0x09)
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb13 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xd9)
pci14 at ppb13 bus 14
pci14: i/o space, memory space enabled
vga1 at pci14 dev 13 function 0: ATI Technologies ES1000 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 63xxESB LPC Interface Bridge (rev. 0x09)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
uhub3 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
atapibus0 at atabus0: 2 targets
uhub4 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
atapibus0 drive 0: <TSSTcorpCD-RW/DVD-ROM TSL462D, , DE07> cdrom removable
not configured
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
ukbd0 at uhidev0
uhub5 at uhub2 port 5: Cypress Semiconductor USB2 Hub, class 9/0, rev
2.00/0.0b, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
Kernelized RAIDframe activated
md0: internal 2000 KB image area
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 186 days
WARNING: CHECK AND RESET THE DATE!
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 0
uhidev2: Dell Dell USB Mouse, rev 1.10/29.10, addr 3, iclass 3/1
ums1 at uhidev2: 3 buttons and Z dir.
wsmouse1 at ums1 mux 0
umass0 at uhub5 port 2 configuration 1 interface 0
umass0: USB 2.0 Flash Disk, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB 2.0, Flash Disk, 0.00> disk removable
sd0: 1967 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 4030463 sectors
umass0: at uhub5 port 2 (addr 3) disconnected
sd0: detached
scsibus0: detached
umass0: detached
uhidev0: at uhub3 port 1 (addr 2) disconnected
wskbd1: disconnecting from wsdisplay0
wskbd1: detached
ukbd0: detached
uhidev0: detached
uhidev1: at uhub3 port 1 (addr 2) disconnected
wsmouse0: detached
ums0: detached
uhid0: detached
uhid1: detached
uhidev1: detached
uhidev2: at uhub3 port 2 (addr 3) disconnected
wsmouse1: detached
ums1: detached
uhidev2: detached
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 0
uhidev2: Dell Dell USB Mouse, rev 1.10/29.10, addr 3, iclass 3/1
ums1 at uhidev2: 3 buttons and Z dir.
wsmouse1 at ums1 mux 0
uhidev0: at uhub3 port 1 (addr 2) disconnected
wskbd1: disconnecting from wsdisplay0
wskbd1: detached
ukbd0: detached
uhidev0: detached
uhidev1: at uhub3 port 1 (addr 2) disconnected
wsmouse0: detached
ums0: detached
uhid0: detached
uhid1: detached
uhidev1: detached
uhidev2: at uhub3 port 2 (addr 3) disconnected
wsmouse1: detached
ums1: detached
uhidev2: detached
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
umass0 at uhub5 port 1 configuration 1 interface 0
umass0: USB 2.0 Flash Disk, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB 2.0, Flash Disk, 0.00> disk removable
sd0: 1967 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 4030463 sectors
------------------------------------------------------------------------------
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of tech-side developers & brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing, &
iPhoneDevCamp as they present alongside digital heavyweights like Barbarian
Group, R/GA, & Big Spaceship. http://p.sf.net/sfu/creativitycat-com
_______________________________________________
g4u-help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/g4u-help
