Thanks Benoit. It works fine now. Regards, Ricardo Díaz
2010/9/6 Benoît Minisini <[email protected]> > > Hi, > > > > I usually use the firsts columns in a gridview to put into some relevant > > information (f.e. the Id key field of the records). Because of this, > after > > the grid is filled, I set to "no visible" the first, the second or others > > columns by set their width to 0. > > > > In gambas2 with qt there's no problem but in gambas3 with qt4 the second > > column width is mysteriously set to 100. > > > > It's a bug? > > > > I've attached an example of this made in gambas3. It was tested in ubuntu > > 10.04 x86_64 gnome. > > > > Regards, > > Ricardo Díaz > > the bug has been fixed in revision #3186. > > Regards, > > -- > Benoît Minisini > > > ------------------------------------------------------------------------------ > This SF.net Dev2Dev email is sponsored by: > > Show off your parallel programming skills. > Enter the Intel(R) Threading Challenge 2010. > http://p.sf.net/sfu/intel-thread-sfd > _______________________________________________ > Gambas-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/gambas-user > ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Gambas-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gambas-user
