Le 08/10/2014 23:15, T Lee Davidson a écrit : > Confirmed with v3.5.4. Except simply opening another project with > File->Open_project does not clear the incorrect filters. I have to Quit > and re-launch Gambas to clear them. > > > On 10/08/2014 10:53 AM, Willy Raets wrote: >> Try this at home and see what goes wrong. >> Both 3.5.4 and 3.5.90 (rev#6521) show this behaviour. >> >> 1. Open a project in IDE >> 2. In project browser >> - right click 'Sources' >> - select 'New' >> - select 'Module' >> - Click tab 'Existing' >> - 'Gambas modules (*.module) is the correct filter set >> 3. Repeat step 2 for Class, Form and Report (if gb.report activated) >> All should be good so far and correct filters should be shown. >> >> 4. In Project browser >> - right click 'Data' >> - select 'New' >> - select 'Image' >> - click tab 'Existing' >> - 'Gambas modules (*.module) is the WRONG filter set!! >> 5. Repeat step 4 for HTML file, Stylesheet, Javascript file and Other >> You see what goes wrong in the filter. >> Somehow the filters of Sources are kept. >> >> No to make it even odder try this: >> 1. Open ANOTHER project in IDE (important) >> 2. In Project browser >> - right click 'Data' >> - select 'New' >> - select 'Image' >> - click tab 'Existing' >> - 'Images files (*.png,*jpg,..) is the correct filter set >> 3. Repeat step 4 for HTML file, Stylesheet, Javascript file and Other >> All should be good so far and correct filters should be shown. >> >> 4. In project browser >> - right click 'Sources' >> - select 'New' >> - select 'Module' >> - Click tab 'Existing' >> - 'Images files (*.png,*jpg,..) is the WRONG filter set!! >> 5. Repeat step 2 for Class, Form and Report (if gb.report activated) >> You see what goes wrong in the filter. >> This time the filters of Data are kept. >> >> So, filters seem to depend on if you first right clicked 'Sources' or >> 'Data' in the Project browser. >> >
I fixed the behaviour of that dialog in revision #6522. If you can tell me if it is ok for you... -- Benoît Minisini ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Gambas-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gambas-user
