Hi Peter:
If you installed the program using RPM, it will tell you that you are
missing rrdtool (if you do not have it installed).
That should be the only thing you need for a RH9 system - it is used to
generate the graphs.
Try out what Rene suggested, that sounds like the ticket to your
problem.
Cheers,
Bernard
________________________________
From: Chiu, PCM (Peter) [mailto:[EMAIL PROTECTED]
Sent: Monday, April 19, 2004 13:02
To: Bernard Li; Chiu, PCM (Peter) ;
'[email protected]'
Subject: RE: [Ganglia-general] A new user question on
ganglia-webfrontend
Hello Bernard,
% telnet localhost 8651 | grep "<HOST"
returns an entry
<HOST NAME=balmy.badc.rl.ac.uk" IP="xxxx.xxxxx..."
Don't think the ganglia documentation
http://ganglia.sourceforge.net/docs/
<http://ganglia.sourceforge.net/docs/>
states the need for rrdrtool. It only mentions PHP.
Are there more software needed for a RedHat 9 or RHEL AS 3.0
system?
Pointers of where they are pls?
Thanks. Peter
-----Original Message-----
From: Bernard Li [mailto:[EMAIL PROTECTED]
Sent: 19 April 2004 20:53
To: Chiu, PCM (Peter) ;
[email protected]
Subject: RE: [Ganglia-general] A new user question on
ganglia-webfrontend
Hi Peter:
What happens if you do the following in your 'headnode':
% telnet localhost | grep "<HOST"
Does it list the hosts?
P.S. I assume you have rrdtool installed as well,
correct?
Cheers,
Bernard
________________________________
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chiu,
PCM (Peter)
Sent: Monday, April 19, 2004 12:27
To: '[email protected]'
Cc: Chiu, PCM (Peter)
Subject: [Ganglia-general] A new user question
on ganglia-webfrontend
Hi,
I followed the instructions given in
http://ganglia.sourceforge.net/docs/
<http://ganglia.sourceforge.net/docs/>
to mount the ganglia-monitor-core-gmond-2.5.6-1
and gmetad-2.5.6-1,
as well as untarring the
ganglia-webfrontend-2.5.5.tar into /var/www/html/ganglia.
Having started up gmond and gmetad, I open up
http://localhost/ganglia <http://localhost/ganglia> and
I can see the local host report on the web page.
But there is no graph showing the cpu load and
other status progress.
The ganglia documentation seems to have stopped
here.
Have I missed anything to enable the graphs
showing the various status?
(PS. I can see some .rrd files under
/var/lib/ganglia/rrds/__SummaryInfo__ directories).
Thanks. Peter
