On Sat, 27 Oct 2007, Andrew Rowland wrote:
> I have just installed Ganglia-3.0.5. Configured without gexec on both > machines and with gmetad on one, but not the other. I am able to start > gmond and gmetad with no errors. But I am having problems on one of my > machines with gmond. > > I'm far from an expert and would appreciate a pointer or two. I've > searched the mail archives, read the gmond man-page, and Googled the > ARPANet, but haven't found anything except this posting > http://www.mail-archive.com/[email protected]/msg02601.html. > The poster had an error in his conf file, but didn't post what the error > was. > > Below is what I believe to be the pertinent information. But if there > is more that is needed, I will post it. > > Issuing gstat on the head node gives the following: > > CLUSTER INFORMATION > Name: clusterfsck > Hosts: 1 > Gexec Hosts: 0 > Dead Hosts: 0 > Localtime: Sat Oct 27 16:34:15 2007 > > There are no hosts running gexec at this time > > When I gstat -i 172.16.1.101 from the head node, I get the following and > the gmond daemon is killed on 172.16.1.101. > > gexec_cluster() XML_ParseBuffer() error at line 51: > no element found > > Unable to get hostlist from 172.16.1.101 8649! > I have never used gstat to check wether gmond runs ok or not. Did you try this: # telnet 172.16.1.101 8649 Matthias > SSHing into 172.16.1.101 and issuing a gstat gives the same error and > kills the gmond daemon. > > gexec_cluster() XML_ParseBuffer() error at line 51: > no element found > > Unable to get hostlist from localhost 8649! > > I am using essentially the default configuration on both machines as > created by: > > gmond --default-config > /etc/gmond.conf. > > <SNIP> > /* This configuration is as close to 2.5.x default behavior as possible > The values closely match ./gmond/metric.h definitions in 2.5.x */ > globals { > daemonize = yes > setuid = no > user = nobody > debug_level = 0 > max_udp_msg_len = 1472 > mute = no > deaf = no > host_dmax = 0 /*secs */ > cleanup_threshold = 300 /*secs */ > gexec = no > } > > /* If a cluster attribute is specified, then all gmond hosts are wrapped > inside > * of a <CLUSTER> tag. If you do not specify a cluster tag, then all > <HOSTS> will > * NOT be wrapped inside of a <CLUSTER> tag. */ > cluster { > name = "clusterfsck" > owner = "The ReliaFree Project" > latlong = "unspecified" > url = "http://reliafree.sourceforge.net"; > } > > /* The host section describes attributes of the host, like the location > */ > host { > location = "unspecified" > } > > /* Feel free to specify as many udp_send_channels as you like. Gmond > used to only support having a single channel */ > udp_send_channel { > mcast_join = 239.2.11.71 > port = 8649 > ttl = 1 > } > > /* You can specify as many udp_recv_channels as you like as well. */ > udp_recv_channel { > mcast_join = 239.2.11.71 > port = 8649 > bind = 239.2.11.71 > } > > /* You can specify as many tcp_accept_channels as you like to share > an xml description of the state of the cluster */ > tcp_accept_channel { > port = 8649 > } > </SNIP> > > TIA, > > Andrew > > -- > Andrew "Weibullguy" Rowland > Reliability & Safety Engineer > > [EMAIL PROTECTED] > http://webpages.charter.net/weibullguy > http://reliafree.sourceforge.net > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Ganglia-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ganglia-general
