Hi Johnny: On Wed, Jul 7, 2010 at 5:10 PM, Johnny Costello <[email protected]> wrote:
> I have some Hosts that I originally put into one Cluster. I wanted to change > them to a different cluster. I created a new Data Source, remove the IP’s > from the old Data Source in the gmetad.conf file on the server node. I > changed the Cluster, Send and Receive on the Nodes config file and restarted > both the node and server. The Node is still showing up in the old cluster > and is reading as down even though it is up. Has anyone had this happen > before? Make sure that the different cluster is clustering via a different port than the original cluster (default port is 8649) -- nodes are clustered via the port, not by name or data_source. The usual sequence of daemon restart is: 1) stop everything 2) start all gmonds 3) start gmetad Give that a shot after you've made the necessary changes and see if that helps. Cheers, Bernard ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Ganglia-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ganglia-general
