The solution is to build a gasifier which will accept other than hard,
large materials. We have done this and the feeder actually breaks up
any pelleted materials that are fed into it. The gas cleaning train
will remove all of the tars, oils, particulate down to the dewpoint and
along with a low enough dewpoint, the moisture and organics which carry
over into the engine if not done right. Otherwise, the gasifier will
have very limited range feedstock acceptability and issues with long
term engine operation.
Sincerely,
Leland T. "Tom" Taylor
President
Thermogenics Inc.
-----Original Message-----
From: doug.williams <[email protected]>
To: Discussion of biomass pyrolysis and gasification
<[email protected]>
Sent: Sat, Feb 12, 2011 9:24 pm
Subject: Re: [Gasification] Gasification of briquettes
John,Jim, and Colleagues,
john, this is a hard problem, but there are some partial fixes that
might get things to tolerable. it can likely be solved without a 50k
extruder or giving up.
Jim offers some interesting possibilities, and quite tempting if no
explanation was forthcoming. I have explained the cause, and the
briquette still has to turn to carbon, no matter how you get the
briquette to the carbonizing temperatures which expands the individual
compressed fines. Binders would help if you have buckets of tar to get
rid off, but this is not the case in John situation, explained to me in
a separate earlier communication, that I missed in my early scan of my
in-box.
For those wanting to explore thermal bonded briquetting of the type
that improves their chances for gasification, refer to this forum
archive: http://www.bioenergylists.org/en/retasiabriquette They are
very DIY, and would be cheap to any healthy scavenger of recycled
materials.
Jims final question:
what happened to the high resin block fuels?
His user changed over to compresses combustion fuel
briquettes.manufacture.
High resin block fuels as you refer to them, can cover most species of
conifers (pines), although some seem to have more resin when cut green.
If the gasifier is designed for these soft woods, which require
smaller dimensions, everything passing through the bed carbonizes. The
larger dimensioned hardwood block gasifiers cannot handle conifer
blocks, and is why many in Europe get into tar problems, using WW2
design parameters, but not sticking to the regulated fuel
specifications of that era.
isn't gasification fun?
I can only concur that when you stop learning, you also stop
breathing.(:-)
Hope this provides more understanding.
Doug Williams,
Fluidyne._______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
